Monday, June 17, 2013

Why Is Concrete Waterproofing Admixture Used In Building

By Margarita Joseph


We all aim at achieving touch standing structures at the end of a construction job, and what greater way to do that than to use concrete waterproofing admixture in the equation. This is one of the essential construction chemicals every mason or builder needs to know about. Below you will get to know what this chemical formula used for and what it can achieve for your concrete structures.

Concrete waterproofing serves the triple purpose of protecting concrete finishes from moisture o vapor, preventing against corrosion and keeping water content away from the concrete surfaces. Concrete in its regular nature is highly absorbent and just about any liquid can dissolve into it corrosive or non-corrosive. But as a builder you do not want this to happen because a soggy concrete surface can lead to dangerous cracks on the floor finishes and walls as well.

So builders are not taking risks anymore and are adding this water proofing chemical to reinforce their stone constructions. This was not the case in the past when all that could be used was water-resistant peel membranes and spray coast. But as it was discovered, these two materials functioned perfectly though they had a short lifespan that left building vulnerable to damage or dampening.

After a series of more trials and errors, watertight admixture chemical was discovered to be the answer to keeping stone constructions water resistant. Admixture then became the trademark solution in several construction jobs ranging from simple curbs to heavy masonry work like construction of dams, storage units and swimming pools. What this chemical does is seal off the porous surface of concrete preventing water or corrosive chemicals from going through.

When bought off the shelf, this chemical comes in a powder form which is added to the sand, cement and stone blend prior to any construction work. It is important to have admixture as a main ingredient in building foundations for homes, safe basements for houses or the construction hydro plants for treating water.

Once you get to use this special water-sealing chemical then you get to enjoy the benefits most builders are enjoying. In terms of performance, admixture has far surpassed spray coasts and water-resistant peel membranes. Moreover, any building that used this chemical in its construction has a low risk of getting destroyed through dampening. There are more advantages to be enjoyed such as a lower cost of maintenance in the cycle of the building, immense durability and high environmental friendliness.

With watertight admixture you can never go wrong on the end product plus the reduced cost of building is one advantage to be discussed broadly. Even though you may find the admixture having a bigger price tag than conventional water-sealing methods, you will discover that in the long-run admixture is cheaper. Think of the number of repairs you are saved just by having a fortified structure and the fact that water-tight structures tend to last longer and serve you for years on end.

Ask any builder and they would tell you a watertight wall has less construction liabilities than a dump one. As a home-owner, the idea of dump looking walls or mold field ceilings is not an idea you would entertain. This is why concrete waterproofing admixture should be part of your construction budget today.




About the Author:



0 comments:

Post a Comment

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Best Buy Coupons