10:22 AM
Unknown
Setting up suitable lighting within a heliport is a good idea. This is meant to improve the light conditions in case it is dark or even when it is cloudy. Also, there are special bulbs designed to signal warnings and important information to the pilots. However, this needs uniformity as any confusion may lead to a fatal accident. The bulbs designed should be standardized to meet certain requirements. As a result, when setting up helipad lighting, consider the points enumerated below.
The signals conveyed in form of light may be obscured by tall towers built around the port. If the message is not effectively communicated, a fatal accident may happen. To refrain from this, the director should give a construction directive to all land owners around the heliport. They should not erect or set up tall structures exceeding a certain height.
If the pilots will not understand the message communicated, then an undesirable accident may occur. For that reason, they can be enrolled at a suitable training institution where they will learn the fundamental basics of communication. However, there are international standards that have been set to regulate the production of these special bulbs. This is meant to ensure that similar messages are communicated using similar bulbs.
You need to improve the lighting condition if the environment is cloudy or dark. Then, make sure you set up girders to fix the bulbs. As a result, you should establish a maximum height that should never be exceeded. If you will not maintain the girders within a manageable height, then, the problem of communication obstruction would replicate.
Different bulbs have been designed but, some of them emit frequencies that are harmful to eyesight. For that case, you must analyze the frequencies emitted by the bulbs you buy. When you set out to the market, make a prudent choice on the best bulbs that will not emit such frequencies. Suitably, get specification from a health officer. He or she would advise you on the best bulbs to buy.
It is normal to have power breakdown in any institution. However, this should not stress you as much since you can overcome it. The best thing to do is to install an automatic power back up system within the port. Choose an appropriate point where to set it up. Then, when a blackout happens, you would not have to halt all the activities that go on. Nevertheless, you could negotiate with the officers in charge of lighting in your country to fix the problem immediately it occurs.
You should organize for a maintenance program within the system. The person in charge should make regular inspections and find out those bulbs that have been damaged. The, he or she should fix them or make a replacement. If this will not be accomplished in good time then, a serious problem may occur.
As in the highlighted points, you understand that, you need to install light bulbs that are internationally accepted and emit safe frequencies. If not, they would affect the pilot vision and this can cause a very serious accident. Also, consider having a power back up program that will substitute electric power when there occurs a blackout.
The signals conveyed in form of light may be obscured by tall towers built around the port. If the message is not effectively communicated, a fatal accident may happen. To refrain from this, the director should give a construction directive to all land owners around the heliport. They should not erect or set up tall structures exceeding a certain height.
If the pilots will not understand the message communicated, then an undesirable accident may occur. For that reason, they can be enrolled at a suitable training institution where they will learn the fundamental basics of communication. However, there are international standards that have been set to regulate the production of these special bulbs. This is meant to ensure that similar messages are communicated using similar bulbs.
You need to improve the lighting condition if the environment is cloudy or dark. Then, make sure you set up girders to fix the bulbs. As a result, you should establish a maximum height that should never be exceeded. If you will not maintain the girders within a manageable height, then, the problem of communication obstruction would replicate.
Different bulbs have been designed but, some of them emit frequencies that are harmful to eyesight. For that case, you must analyze the frequencies emitted by the bulbs you buy. When you set out to the market, make a prudent choice on the best bulbs that will not emit such frequencies. Suitably, get specification from a health officer. He or she would advise you on the best bulbs to buy.
It is normal to have power breakdown in any institution. However, this should not stress you as much since you can overcome it. The best thing to do is to install an automatic power back up system within the port. Choose an appropriate point where to set it up. Then, when a blackout happens, you would not have to halt all the activities that go on. Nevertheless, you could negotiate with the officers in charge of lighting in your country to fix the problem immediately it occurs.
You should organize for a maintenance program within the system. The person in charge should make regular inspections and find out those bulbs that have been damaged. The, he or she should fix them or make a replacement. If this will not be accomplished in good time then, a serious problem may occur.
As in the highlighted points, you understand that, you need to install light bulbs that are internationally accepted and emit safe frequencies. If not, they would affect the pilot vision and this can cause a very serious accident. Also, consider having a power back up program that will substitute electric power when there occurs a blackout.
0 comments:
Post a Comment